|
The
SERIAL_LCDG is ideal to drive graphical LCD displays with
a simple RS232, TTL or I2C interface.
With
only 1 or 2 wire(s), all graphical functions like Circle,
Square and Rectangle are easily implemented. With only 3 bytes
you can display a full graphical screen. It only requires
5 bytes to draw any circle...
All
you need to know is what data to send !.
RS232
/ TTL :
Serial
data can be configured for a true PC COMM port connection,
or INVERTED TTL when connecting to another microcontroller
or TTL serial device.The Baud rate is dip-switch selectable
to 2400, 9600, 19200, or 76800 Baud.
I2C
:
the
SERIAL_LCDG can be controlled with an I2C interface at up
to 400KHz.
-
Compatible with all LCDs using the T6963C
controller.
- Text
layer adopting character coordinate system
-
Graphic layer adopting dot coordinate system
- Full
TEXT Terminal functions
- Full
HIGH LEVEL GRAPHIC functions ( Circle, Square, Icons, Clip-board...
)
- Separated
layers for Graphic and Text
- Any
size from 64x64 to 240x128
pixels
- support
vertical scrolling
-
Communicates using RS232, TTL or I2C.
- Connects
up to 16 displays over the same interface.
- Backlight
& Contrast is software controled
- 128
bytes User SRAM
- 128
bytes User EEPROM
- standard
18/20 pins SIL & DIL 2.54mm connectors
-
Module size: 64.8mm(L) x 42.0mm(W)
- Optionally
store Graphical screens in EEPROM. Saving/Restoring
a LCD screen, Expressing and saving BMP files.
- Optionally
use 4 or 5 wire Touch screen interface,
or up to a 16 keys keyboard.
French
Documents :
Download
DATASHEET V1.1 ( PDF 0.9Mo ) 
Download
APPLICATION NOTE ( ZIP 4.5Mo )
- All
sources and videos
Download
SERIAL_EKO Protocole
( PDF 0.4Mo )
English
Documents :
Download
PDF DATASHEET V1.1 ( PDF 0.9Mo )
Download
APPLICATION NOTE ( 4.5Mo )
- All
sources and videos
Download
SERIAL_EKO Protocol ( 0.4Mo )
-
Available
soon
|
